Premium Information is available for this item - Upgrade for $1 a day
9530-01-072-2305
Metal Bar
9530010722305 010722305 MIL-C-24679 MILC24679 C71500 HOTFORG 6 1/4 ROUND BAR HOT FORGED 6 1/4IN MIL-C-24679L1 MILC24679 C71500 HOTFORG 6 1/4L1 ROUND BAR HOT FORGED 6 1/4INL1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
16
Marketplace 9530-01-072-2305
Request a Quotation from participating marketplace vendors
Related Documents 9530-01-072-2305 5+ Documents (More...)
C71500 C71500 C71500 C71500 C71500 9530-01 -072-2305 C71500 C71500 C71500 ,MIL-C -24679 , Metal https
,MIL-C- 24679 ,MIL-C-24679 MILC24679 C71500 HOTFORG /fsg ,MIL-C-24679 ,MIL-C - 24679 ,MIL-C C71500
Metal Bar 9530010722305 010722305,MIL-C-24679 C71500 HOTFORG /fsg ,MIL-C https//www.nsnlookup.com
9530016445516016445516,MIL-C-24679 ,MIL-C- 24679 ,MIL-C-24679 https/ https//www.nsnlookup.com Metal
5071 Metal Bar 9530010295071010295071,MIL-C-24679 https//www.nsnlookup.com /fsg-95/fsc-9530/us
-126-1057 3+ Documents https//www.nsnlookup.com https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-01-072-2305
,MIL-C-24679 ,MIL-C- 24679 ,MIL-C-24679 https/ https Metal Bar 9530010295071010295071,MIL-C-24679 5071
,MIL-C- 24679 ,MIL-C-24679 MILC24679 C71500 HOTFORG /fsg ,MIL-C-24679 ,MIL-C - 24679 ,MIL-C C71500
ALLOY71500 6 1/2IN MIL-C-24679C71500 HTFGD61/2IN MIL-C-24679 ALLOY71500 6 1/2INL1 MIL-C-24679C71500
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-01-376-7085 Metal Bar 9530013767085013767085 MIL-C-24679
Restrictions 9530-01-072-2305
9530-01-072-2305 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9530-01-072-2305
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9530-01-072-2305
- Part Number
- Manufacturer
- Status
- MIL-C-24679
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILC24679 C71500 HOTFORG 6 1/4
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- ROUND BAR HOT FORGED 6 1/4IN
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-C-24679L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MILC24679 C71500 HOTFORG 6 1/4L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- ROUND BAR HOT FORGED 6 1/4INL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 9530-01-072-2305
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Criticality Code Justification [CRTL]
- Zzzx
- Cross Section Outside Diameter [ADVL]
- 6.250 Inches Nominal
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Fabrication Method [AARN]
- Hot Rolled
- Heat Treatment [HEAT]
- Annealed
- Material [MATT]
- Copper,Mil-C-24679,Alloy 71500,Comp 70-30
- Nondefinitive Spec/Std Data [ZZZT]
- Mil-C-24679 70-30 Composition And Rd Shape And 6.250 Size And Hot Forged Temper Temper
- Surface Condition [SFCD]
- Ground Overall
DLA Procurement Analysis 9530-01-072-2305
Management Data 9530-01-072-2305
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 9530-01-072-2305
Freight Information 9530-01-072-2305
9530-01-072-2305 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-01-072-2305 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-01-072-2305 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-01-072-2305 is not classified as a special type of cargo when transported by water. 9530-01-072-2305 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-01-072-2305
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 6.3" W x 6.3" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 6.3" W x 6.3" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement