Premium Information is available for this item - Upgrade for $1 a day
9530-00-596-2418
Metal Bar
9530005962418 005962418 AMS-QQ-A-225/5 802000 MS14250C001 QQ-A-225/5
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
14
Marketplace 9530-00-596-2418
Request a Quotation from participating marketplace vendors
Related Documents 9530-00-596-2418 5+ Documents (More...)
,B 211 8 ,B 211 ,B 211 ,B 211 AMS-QQ-A-225/ 5 , AMS-QQ-A-225/ 5 ,B 211 AMS-QQ-A 225 211 AMS-QQ-A
211 AMS-QQ-A -225/ / 5 ,B 211 AMS-QQ-A-225 , 211 AMS-QQ-A-225/ 5 ,B 211 AMS-QQ-A , AMS-QQ-A-225/ 5 ,
225 / 5 ,B 211 8 FT ,B 211 AMS-QQ-A-225/ 5 ,B 211 FT 005962418 218085513 211 AMS-QQ-A 225/ 5 ,B 211
,B 211 AMS-QQ-A-225 / 5 ,B 211 AMS-QQ-A 225 / 5 ,B 211 ,B 211 AMS-QQ-A -225/ 5 ,B B 211 / 5 ,B 211 AMS-QQ-A
,B 211 AMS-QQ-A 225 / 5 ,B 211 FT ,B 211 AMS-QQ-A 211 AMS-QQ-A -225/ / 5 ,B 211 AMS-QQ-A-225
, 211 AMS-QQ-A-225/ 5 ,B 211 AMS-QQ-A , AMS-QQ-A-225/ 5 ,B 211 AMS-QQ-A , 211 AMS-QQ-A-225/ 5 ,B
, BAR , AMS-QQ-A AMS-QQ-A-225/ 5 , 5 BAR , https AMS-QQ-A -225/ 5 , BAR , https// , 211 AMS-QQ-A
,B 211 8 FT 211 AMS-QQ-A-225/ 5 ,B AMS-QQ-A-225/ 5 FT , 211 AMS-QQ-A , 211 AMS-QQ-A-225/ 5 ,B 211
, BAR , AMS-QQ-A-225/ 5 BAR,METAL FT NS AMS-QQ-A-225/ 5 BAR , BAR , AMS-QQ-A-225/ 5 FT 211 AMS-QQ-A
, BAR , AMS-QQ-A-225/ 5 BAR,METAL FT NS AMS-QQ-A-225/ 5 BAR , BAR , AMS-QQ-A-225/ 5 FT NS AMS-QQ-A
Restrictions 9530-00-596-2418
9530-00-596-2418 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9530-00-596-2418
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GT
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9530-00-596-2418
- Part Number
- Manufacturer
- Status
- MS14250C001
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- AMS-QQ-A-225/5
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 802000
- 21450 - Army Weapons Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-QQ-A-225/5
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-225/5
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9530-00-596-2418
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Hexagon
- Cross-Sectional Width Across Flats [BMNZ]
- 0.375 Inches Nominal
- Fabrication Method [AARN]
- Cold Finish
- Heat Treatment [HEAT]
- O-Annealed
- Material Document And Classification [MDCL]
- Qq-A-225/5 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2017
- Nondefinitive Spec/Std Data [ZZZT]
- O Temper
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
DLA Procurement Analysis 9530-00-596-2418
Management Data 9530-00-596-2418
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9530-00-596-2418
Freight Information 9530-00-596-2418
9530-00-596-2418 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-00-596-2418 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-00-596-2418 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-00-596-2418 is not classified as a special type of cargo when transported by water. 9530-00-596-2418 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-00-596-2418
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9530-00-596-2418 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: