Premium Information is available for this item - Upgrade for $1 a day
9530-00-278-0741
Metal Bar
9530002780741 002780741 AMS-QQ-A-225/9 MS14254C077 AMS-STD-184 QQ-A-225/9
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
November 2023
12
Marketplace 9530-00-278-0741
Request a Quotation from participating marketplace vendors
Related Documents 9530-00-278-0741 5+ Documents (More...)
225 /9 ALLOY B221 AMS-STD-184 B221 AMS-QQ-A -225 /9 ALLOY QQ-A - 225/9 ALLOY 002780741 /9 005003972 -
Metal Bar 9530002780741002780741 ALLOY AMS-STD-184 QQ-A AMS-QQ-A -225 /9 ALLOY B221 AMS-STD-184
ALLOY 002780741 /9 005003972 - 006107018 ALLOY AMS-STD -184 https// AMS-STD -184 QQ-A AMS-QQ-A
/fsg-95/fsc-9530/us 9530-00-278-0741 Metal Bar 9530002780741 002780741 QQ-A AMS-QQ-A -225 /9 ALLOY B221
AMS-STD -225 ALLOY AMS-STD -184 QQ-A AMS-QQ-A -225 /9 ALLOY AMS-STD https//www.nsnlookup.com /fsg-95
ALLOY AMS-STD AMS-STD-184 B221 /fsg 005003972 - 006107018 ALLOY AMS-STD - QQ-A AMS-QQ-A -225
/fsg-95/fsc-9530/us 9530-00-278-0741 Metal Bar 9530002780741 002780741 QQ-A AMS-QQ-A -225 /9 ALLOY B221
AMS-STD-184 B221 AMS-QQ-A -225 /9 ALLOY QQ-A - 225/9 ALLOY 002780741 ALLOY AMS-STD-184 QQ-A AMS-QQ-A
/fsg-95/fsc-9530/us 9530-00-278-0741 Metal Bar 9530002780741 002780741 QQ-A AMS-QQ-A -225 /9 ALLOY B221
AMS-STD-184 B221 AMS-QQ-A -225 /9 ALLOY QQ-A - 225/9 ALLOY 002780741 AMS-STD-184 B221 /fsg 005003972
Restrictions 9530-00-278-0741
9530-00-278-0741 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 9530-00-278-0741
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GT
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 9530-00-278-0741
- Part Number
- Manufacturer
- Status
- MS14254C077
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- AMS-STD-184
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-QQ-A-225/9
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-STD-184
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-225/9
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-225/9
- 81348 - Federal Specifications Promulgated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9530-00-278-0741
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Flat
- Cross-Sectional Thickness [ADVM]
- 0.7500 Inches Nominal
- Cross-Sectional Width [ADWH]
- 3.000 Inches Nominal
- Fabrication Method [AARN]
- Cold Finish
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-225/9 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T-6 Temper
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Weight Per Unit Measure [BRFD]
- 2.722 Pounds Per Linear Foot
Weapon Systems (WSDC) 9530-00-278-0741
DLA Procurement Analysis 9530-00-278-0741
- Last Stock Position:
- 103 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9530-00-278-0741
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 9530-00-278-0741
Freight Information 9530-00-278-0741
9530-00-278-0741 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9530-00-278-0741 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9530-00-278-0741 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9530-00-278-0741 is not classified as a special type of cargo when transported by water. 9530-00-278-0741 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-00-278-0741
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9530-00-278-0741 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: