Premium Information is available for this item - Upgrade for $1 a day
9530-00-128-0712
Metal Bar
9530001280712 001280712 MIL-C-15726 COMPC71500 MIL-C-15726 70/30 H01 3.00IN ROUND BAR HARD TEMPER 3IN MIL-C-15726 COMPC71500L1 MILC15726 C71500 TEMPH01 3INRD ROUND BAR HARD TEMPER 3INL1 MILC15726 C71500 TEMPH01 3INRDL1 MIL-C-15726 70/30 H01 3.00INL1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
March 2025
12
Marketplace 9530-00-128-0712
Request a Quotation from participating marketplace vendors
Related Documents 9530-00-128-0712 5+ Documents (More...)
MILC15726 C71500 TEMPH01 3INRD ROUND BAR HARD TEMPER 3INL1 MILC15726 C71500 TEMPH01 3INRDL1 MIL-C-15726
Photo 1/2 NSN 9530-00-128-0712 (Identification) 2/2 - - 1.
MIL-C-15726 COMPC71500L1 MILC15726L1MILC15726 https//www.nsnlookup.com /fsg-95/fsc-9530/us
MIL-C-15726 COMPC71500L1 MILC15726L1MILC15726 C71500 MILC15726 , ,MILC15726 ,MILC15726 C71500
Metal Bar 9530001280712 001280712 COMPC71500 MIL-C-15726 70/30 H01 3.00IN ROUND BAR HARD TEMPER
3IN MIL-C-15726 COMPC71500L1 MILC15726 COMPC71500MIL-C-15726 70/30 H01 3.00INROUND BAR HARD TEMPER 3INMIL-C
Metal Bar 9530001280712 001280712 COMPC71500 MIL-C-15726 70/30 H01 3.00IN ROUND BAR HARD TEMPER
3IN MIL-C-15726 COMPC71500L1 MILC15726 C71500 TEMPH01 3INRD ROUND BAR HARD TEMPER 3INL1 MILC15726 C71500
Metal Bar 9530001280712 001280712 COMPC71500 MIL-C-15726 70/30 H01 3.00IN ROUND BAR HARD TEMPER
3IN MIL-C-15726 COMPC71500L1 MILC15726 COMPC71500MIL-C-15726 70/30 H01 3.00INROUND BAR HARD TEMPER 3INMIL-C
Restrictions 9530-00-128-0712
9530-00-128-0712 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9530-00-128-0712
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9530-00-128-0712
- Part Number
- Manufacturer
- Status
- MIL-C-15726 COMPC71500
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-15726 70/30 H01 3.00IN
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- ROUND BAR HARD TEMPER 3IN
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-C-15726 COMPC71500L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MILC15726 C71500 TEMPH01 3INRD
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- ROUND BAR HARD TEMPER 3INL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- MILC15726 C71500 TEMPH01 3INRDL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- MIL-C-15726 70/30 H01 3.00INL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 9530-00-128-0712
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 3.000 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Fabrication Method [AARN]
- Hard Drawn
- Heat Treatment [HEAT]
- Hard
- Material [MATT]
- Copper Alloy 715
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
- Material Document And Classification [MDCL]
- Mil-C-15726, Comp 70-30 Mil Spec 1St Material Response
- Surface Condition [SFCD]
- Descaled Overall
DLA Procurement Analysis 9530-00-128-0712
Management Data 9530-00-128-0712
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9530-00-128-0712
Freight Information 9530-00-128-0712
9530-00-128-0712 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 030220. A Sub NMFC of X. It has a NMFC Description of BBC BARS/BILLETS R RODS DRAWN ETC. 9530-00-128-0712 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. 9530-00-128-0712 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 14750 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9530-00-128-0712 is not classified as a special type of cargo when transported by water. 9530-00-128-0712 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-00-128-0712
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 3.0" W x 3.0" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 3.0" W x 3.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special requirement – See specific instructions or drawings provided