Premium Information is available for this item - Upgrade for $1 a day
9530-00-128-0699
Metal Bar
9530001280699 001280699 MILC15726 MIL-C-15726C71500TEMPH01 1 1/4 MIL-C-15726C71500TEMPH01 1.25 ROUND BAR HARD TEMPER MILC15726L1 MIL-C-15726C71500TEMPH01 1.25L1 ROUND BAR HARD TEMPERL1 MIL-C-15726C71500TEMPH01 1 1/4L1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
10
Marketplace 9530-00-128-0699
Request a Quotation from participating marketplace vendors
Related Documents 9530-00-128-0699 5+ Documents (More...)
MIL-C-15726C71500TEMPH01 1.25L1 ROUND BAR HARD TEMPERL1 MIL-C-15726C71500TEMPH01 1 1/4L1 A metallic
C71500 TEMPH01 3INRD ROUND BAR HARD TEMPER 3INL1 MILC15726 Metal Bar 9530001280699001280699,MILC15726
2007 9530-01-540-3837 https//www.nsnlookup.com https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-128-0699
Metal Bar 9530001280699 001280699,MILC15726 Related Documents 9530-00-128-0699 https https https
MIL-C-15726 COMPC71500MIL-C-15726 70/30 H01 3.00INROUND BAR HARD TEMPER 3INMIL-C-15726 COMPC71500L1 MILC15726
Metal Bar 9530001280699 001280699,MILC15726 Metal Bar 9530001280712001280712 3IN MIL-C-15726 COMPC71500L1MILC15726
/fsg-95/fsc-9530/us 9530-00-128-0699 Metal Bar 9530001280699 001280699,MILC15726 MILC15726 C71500 TEMPH01
3INRD ROUND BAR HARD TEMPER 3INL1 MILC15726 Metal Bar 9530001280699001280699 ,MILC157269530-00-097-0915
70/30 ,MILC15726 C71500 TEMPH01 3INRD ROUND BAR HARD TEMPER 3INL1 MILC15726 C71500 TEMPH01 3INRDL1 MIL-C
3INL1 MILC15726 C71500 TEMPH01 3INRDL1 MIL-C-15726 70/30 C71500 TEMPH01 3INRD ROUND BAR HARD
Restrictions 9530-00-128-0699
9530-00-128-0699 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9530-00-128-0699
- US Air Force (FGHD)
- Effective Date:
- 1 Apr 1991
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9530-00-128-0699
- Part Number
- Manufacturer
- Status
- MILC15726
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-15726C71500TEMPH01 1 1/4
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-15726C71500TEMPH01 1.25
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- ROUND BAR HARD TEMPER
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILC15726L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-C-15726C71500TEMPH01 1.25L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- ROUND BAR HARD TEMPERL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- MIL-C-15726C71500TEMPH01 1 1/4L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 9530-00-128-0699
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 1.250 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Fabrication Method [AARN]
- Hard Drawn
- Heat Treatment [HEAT]
- Hard
- Material [MATT]
- Copper Alloy 715
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
- Material Document And Classification [MDCL]
- Mil-C-15726, Comp 70-30 Mil Spec 1St Material Response
- Surface Condition [SFCD]
- Descaled Overall
Management Data 9530-00-128-0699
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9530-00-128-0699
Freight Information 9530-00-128-0699
9530-00-128-0699 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 030220. A Sub NMFC of X. It has a NMFC Description of BBC BARS/BILLETS R RODS DRAWN ETC. 9530-00-128-0699 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. 9530-00-128-0699 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 14750 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9530-00-128-0699 is not classified as a special type of cargo when transported by water. 9530-00-128-0699 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-00-128-0699
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 1.3" W x 1.3" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 1.3" W x 1.3" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special requirement – See specific instructions or drawings provided