Premium Information is available for this item - Upgrade for $1 a day
9520-01-354-7654
Structural Beam
9520013547654 013547654 ABS RULES MIL-S-20166 MIL-S-22698
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
8
Marketplace 9520-01-354-7654
Request a Quotation from participating marketplace vendors
Related Documents 9520-01-354-7654 5+ Documents (More...)
MIL-S-22698 BEAM,STRUCTURAL 45 EA NS Request Quotation MIL-S-20166 BEAM,STRUCTURAL 49 EA NS Request Quotation
FedMall Updated Every 15 Minutes 9520-01-354-7654 BUY NE FedMall Updated Every Day 9520-01-354-7654
MIL-S-20166 from a ferrous or nonferrous material MIL-S-22698 BEAM,STRUCTURAL 45 EA NS Request Quotation
Request https//www.nsnlookup.com /fsg-95/fsc-9520/us 9520-01-354-7654 Structural Beam 9520013547654
MIL-S-20166 CHANNEL,STRUCTURAL 49 FT NS Request Quotation MIL-S-22698 CHANNEL,STRUCTURAL 45 FT NS Request
Structural Beam 9520013547654 013547654 MIL-S-20166MIL-S-22698 A structural shape fabricated from
MIL-S-22698 BEAM,STRUCTURAL 45 EA NS Request Quotation MIL-S-20166 BEAM,STRUCTURAL 49 EA NS Request Quotation
,STRUCTURAL MIL-S-20166 from a ferrous or nonferrous material MIL-S-22698 BEAM,STRUCTURAL https https
MIL-S-22698 CHANNEL,STRUCTURAL 45 FT NS Request Quotation MIL-S-20166 CHANNEL,STRUCTURAL 49 FT NS Request
Structural Beam 9520013547654 013547654 MIL-S-20166MIL-S-22698 A structural shape fabricated from
Restrictions 9520-01-354-7654
9520-01-354-7654 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9520-01-354-7654
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9520-01-354-7654
- National Security Agency (DGX1)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- DKZ1
- Supplementary Receivers:
- KZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- GG
Approved Sources 9520-01-354-7654
- Part Number
- Manufacturer
- Status
- ABS RULES
- Manufacturer
- 0T3K3 - American Bureau Of Shipping (Active)
- Incomplete Reference
- Incomplete Reference
- MIL-S-20166
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-S-22698
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9520-01-354-7654
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- I Shape
- Bottom Flange Width [BQJH]
- 8.000 Inches Nominal
- Fabrication Method [AARN]
- Rolled
- Fillet Radius Where Bottom Left Flange Joins Web Flange/Leg [BPXK]
- 0.300 Inches Nominal
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.300 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.300 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.300 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Identical W/First Tip
- Material [MATT]
- Steel, Abs Rules Grade Ah-36
- Nondefinitive Spec/Std Data [ZZZT]
- Grade Ah-36
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 4.000 Inches Nominal
- Left Side Bottom Flange Thickness [BMPR]
- 0.250 Inches Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 4.000 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.250 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Nominal
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 4.000 Inches Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.250 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 4.000 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.250 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 8.000 Inches Nominal
- Top Flange Width [BQJG]
- 8.000 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.250 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9520-01-354-7654
Management Data 9520-01-354-7654
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9520-01-354-7654
Freight Information 9520-01-354-7654
9520-01-354-7654 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9520-01-354-7654 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9520-01-354-7654 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9520-01-354-7654 is not classified as a special type of cargo when transported by water. 9520-01-354-7654 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9520-01-354-7654
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9520-01-354-7654 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: