Premium Information is available for this item - Upgrade for $1 a day
9510-01-274-0429
Metal Bar
9510012740429 012740429 QQ-S-763 QQ-S-763L1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
8
Marketplace 9510-01-274-0429
Request a Quotation from participating marketplace vendors
Related Documents 9510-01-274-0429 5+ Documents (More...)
QQ-S-763 BAR,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763
QQ-S-763CL304C0NDAH0TF 2INRDL1 QQ-S-763 A metallic QQ-S-763 BAR,METAL 9 FT NS Request Quotation QQ-S763
QQ-S-763 BAR,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763
9 FT NS Request Quotation AMS-QQ-S-763 ANGLE,STRUCTURAL 36 FT NS Request Quotation AMS-QQ-S-763 ANGLE
AMS-QQ-S-763L1 QQ-S-763CL304C0NDAH0TF 2INRDL1 QQ-S-763 A metallic QQ-S-763 BAR,METAL 9 FT NS Request
QQ-S-763CL304COND BCD 1 1/2RDL1 QQ-S-763L1 A metallic product of AMS-QQ-S-763L1 QQ-S-763CL304C0NDAH0TF
,CL 304, COND A QQS763L1 AMS-QQ-S-763L1 5 INCHES (ROUNDBAR) 5 INCHES (ROUNDBAR)L1 QQ-S-763 CL304/304L
QQ-S-763 BAR,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763
CL440C DIA0.236 QQ-S-763 A ferrous or nonferrous wire having a solid cross section that QQ-S-763
A ferrous or nonferrous wire having AMS-QQ-S-763 WIRE,NONELECTRICAL 36 EA NS Request https/ AMS2806 QQ-S
Restrictions 9510-01-274-0429
9510-01-274-0429 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9510-01-274-0429
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9510-01-274-0429
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9510-01-274-0429
- Part Number
- Manufacturer
- Status
- QQ-S-763
- Manufacturer
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- QQ-S-763L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9510-01-274-0429
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Criticality Code Justification [CRTL]
- Zzzw
- Cross Section Outside Diameter [ADVL]
- 2.750 Inches Nominal
- Departure From Cited Document [ZZZW]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Material Document And Classification [MDCL]
- Qq-S-763, Class 304 Fed Spec 1St Material Response
- Material [MATT]
- Steel Comp 304
- Length [ABRY]
- 6.000 Feet Minimum And 20.000 Feet Maximum
- Special Features [FEAT]
- Centerless Ground
Management Data 9510-01-274-0429
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9510-01-274-0429
Freight Information 9510-01-274-0429
9510-01-274-0429 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-01-274-0429 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 9510-01-274-0429 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-01-274-0429 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9510-01-274-0429 is not classified as a special type of cargo when transported by water. 9510-01-274-0429 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-01-274-0429
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 250.0" H x 3.0" W x 3.0" L
- --
- --
- --
- Any Suitable Process
- 250.0" H x 3.0" W x 3.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- Wood Blocking and Bracing, Fasteners, or Steel Strapping, for Tie-down purposes. Rubber tired wheels shall be blocked clear of the floor of the crate or skid and shall not be load bearing
- Not Applicable
- --
- Open for inspection or use only
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement