Premium Information is available for this item - Upgrade for $1 a day
9510-01-261-5730
Metal Bar
9510012615730 012615730 DOD-F-24669/2 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT6INL1 D0DF24669/2CMPSNF22CNDNHT6IN
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
June 2023
10
Marketplace 9510-01-261-5730
Request a Quotation from participating marketplace vendors
Related Documents 9510-01-261-5730 5+ Documents (More...)
RQST NE Updated Every Day 9510-01-261-5730 RQST Updated Every Day 9510-01-261-5730 RQST NE Related Documents
9510-01-261-5730 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-01-261-5730
D0DF24669/2CMPSNF22CNDNHT3IN A metallic product of D0DF24669/2CMPSNF11CNDNHT2INL1 DOD-F-24669/2L1
D0DF24669/2CMPSNF22CNDNHT7IN A metallic product of D0DF24669/2CMPSNF22CNDNHT3INL1 DOD-F-24669/2L1
Metal Bar 9510012615730 012615730 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT6INL1 D0DF24669/2CMPSNF22CNDNHT6IN
A metallic product of D0DF24669/2CMPSNF22CNDNHT3INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT3IN A
D0DF24669/2CMPSNF22CNDNHT7INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT7IN A metallic product of
fsc-9510/us 9510-01-260-4157 Metal Bar 9510012604157 012604157 D0DF24669/2CMPSNF22CNDNHT3INL1 DOD-F-24669/2L1
D0DF24669/2CMPSNF22CNDNHT3INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT3IN A metallic product of
fsc-9510/us 9510-01-258-4049 Metal Bar 9510012584049 012584049 D0DF24669/2CMPSNF22CMDMHT4INL1 DOD-F-24669/2L1
Restrictions 9510-01-261-5730
9510-01-261-5730 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9510-01-261-5730
- US Air Force (FGHD)
- Effective Date:
- 1 Apr 1994
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
- Greece (ZU01)
- Effective Date:
- 1 Aug 2005
Approved Sources 9510-01-261-5730
- Part Number
- Manufacturer
- Status
- D0DF24669/2CMPSNF22CNDNHT6IN
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- DOD-F-24669/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- DOD-F-24669/2L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- D0DF24669/2CMPSNF22CNDNHT6INL1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9510-01-261-5730
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Edge Type [AQQR]
- Rounded
- Criticality Code Justification [CRTL]
- Zzzw
- Cross Section Outside Diameter [ADVL]
- 6.000 Inches Nominal
- Departure From Cited Document [ZZZW]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Fabrication Method [AARN]
- Wrought
- Heat Treatment [HEAT]
- Annealed Or Normalized Or Tempered
- Material [MATT]
- Steel
- Nondefinitive Spec/Std Data [ZZZT]
- F22 Composition And Ht Condition
Management Data 9510-01-261-5730
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 9510-01-261-5730
Freight Information 9510-01-261-5730
9510-01-261-5730 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-01-261-5730 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 9510-01-261-5730 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-01-261-5730 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-01-261-5730 is not classified as a special type of cargo when transported by water. 9510-01-261-5730 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-01-261-5730
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 180.0" H x 6.0" W x 6.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 180.0" H x 6.0" W x 6.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement