Premium Information is available for this item - Upgrade for $1 a day
9510-01-258-4047
Metal Bar
9510012584047 012584047 DOD-F-24669/2 D0DF24669/2CMPSNF22CNDNHT2INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT2IN
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
7
Marketplace 9510-01-258-4047
Request a Quotation from participating marketplace vendors
Related Documents 9510-01-258-4047 5+ Documents (More...)
RQST NE Updated Every Day 9510-01-258-4047 RQST Updated Every Day 9510-01-258-4047 RQST NE Related Documents
9510-01-258-4047 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-01-258-4047
D0DF24669/2CMPSNF22CNDNHT3IN A metallic product of D0DF24669/2CMPSNF11CNDNHT2INL1 DOD-F-24669/2L1
DOD-F-24669/2L1 https//www.nsnlookup.com /fsg-95 Metal Bar 9510012584051012584051 Upgrade for $1 a day
D0DF24669/2CMPSNF11CNDNHT2INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF11CNDNHT2IN A metallic product of
D0DF24669/2CMPSNF22CNDNHT3INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT3IN A metallic product of
D0DF24669/2CMPSNF22CMDMHT4INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT4IN A metallic product of
Metal Bar 9510012584047 012584047 D0DF24669/2CMPSNF22CNDNHT2INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT2IN
Metal Bar 9510012584047 012584047 D0DF24669/2CMPSNF22CNDNHT2INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT2IN
D0DF24669/2CMPSNF22CMDMHT4INL1 DOD-F-24669/2L1 D0DF24669/2CMPSNF22CNDNHT4IN A metallic product of
Restrictions 9510-01-258-4047
9510-01-258-4047 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9510-01-258-4047
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9510-01-258-4047
- Part Number
- Manufacturer
- Status
- D0DF24669/2CMPSNF22CNDNHT2IN
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- DOD-F-24669/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- D0DF24669/2CMPSNF22CNDNHT2INL1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- DOD-F-24669/2L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9510-01-258-4047
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Edge Type [AQQR]
- Rounded
- Criticality Code Justification [CRTL]
- Zzzw
- Cross Section Outside Diameter [ADVL]
- 2.000 Inches Nominal
- Departure From Cited Document [ZZZW]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Fabrication Method [AARN]
- Wrought
- Heat Treatment [HEAT]
- Annealed Or Normalized Or Tempered
- Material [MATT]
- Steel
- Nondefinitive Spec/Std Data [ZZZT]
- F22 Composition And Ht Condition
DLA Procurement Analysis 9510-01-258-4047
Management Data 9510-01-258-4047
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 9510-01-258-4047
Freight Information 9510-01-258-4047
9510-01-258-4047 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-01-258-4047 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 9510-01-258-4047 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-01-258-4047 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9510-01-258-4047 is not classified as a special type of cargo when transported by water. 9510-01-258-4047 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-01-258-4047
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 180.0" H x 2.0" W x 2.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 180.0" H x 2.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special requirement – See specific instructions or drawings provided