Premium Information is available for this item - Upgrade for $1 a day
9510-01-049-7955
Metal Bar
9510010497955 010497955 AMS-QQ-S-763 QQ-S-763L1 AMS-QQ-S-763L1 QQ-S-763
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
7
Marketplace 9510-01-049-7955
Request a Quotation from participating marketplace vendors
Related Documents 9510-01-049-7955 5+ Documents (More...)
AMS-QQ-S-763L1 QQ-S-763CL304C0NDAH0TF 2INRDL1 QQ-S-763 A metallic QQ-S-763 BAR,METAL 9 FT NS Request
Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763 9 FT NS Request Quotation AMS-QQ-S
QQ-S-763 BAR,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763
AMS-QQ-S-763L1 QQ-S-763CL304C0NDAH0TF 2INRDL1 QQ-S-763 A metallic QQ-S-763 BAR,METAL 9 FT NS Request
QQ-S-763 BAR,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763
AMS-QQ-S-763L1 QQ-S-763CL304C0NDAH0TF 2INRDL1 QQ-S-763 A metallic QQ-S-763 BAR,METAL 9 FT NS Request
QQ-S-763 BAR,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763
AMS-QQ-S-763L1 QQ-S-763CL304C0NDAH0TF 2INRDL1 QQ-S-763 A metallic QQ-S-763 BAR,METAL 9 FT NS Request
AMS-QQ-S-763L1 QQ-S-763CL304C0NDAH0TF 2INRDL1 QQ-S-763 A metallic QQ-S-763 BAR,METAL 9 FT NS Request
Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763 9 FT NS Request Quotation AMS-QQ-S
Restrictions 9510-01-049-7955
9510-01-049-7955 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9510-01-049-7955
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9510-01-049-7955
- Part Number
- Manufacturer
- Status
- AMS-QQ-S-763
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- QQ-S-763L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-QQ-S-763L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- QQ-S-763
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-S-763
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9510-01-049-7955
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
Management Data 9510-01-049-7955
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9510-01-049-7955
Freight Information 9510-01-049-7955
9510-01-049-7955 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-01-049-7955 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-01-049-7955 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-01-049-7955 is not classified as a special type of cargo when transported by water. 9510-01-049-7955 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-01-049-7955
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 240.0" H x 2.0" W x 2.0" L
- --
- --
- --
- Any Suitable Process
- 240.0" H x 2.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Open for inspection or use only
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement