Premium Information is available for this item - Upgrade for $1 a day
9510-00-926-4696
Metal Bar
9510009264696 009264696 QQS763 QQ-S-763L1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
9
Marketplace 9510-00-926-4696
Request a Quotation from participating marketplace vendors
Related Documents 9510-00-926-4696 5+ Documents (More...)
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-926-4696 Metal Bar 9510009264696 009264696,QQS763
QQS763 001517340 AMS-QQ-S-763 QQS763L1CL304CNDNA1IN HEX AMS-QQ-S-763L1 QQS763L1 QQS763L1CL304CNDNA1IN
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-926-4696 Metal Bar 9510009264696 009264696,QQS763
QQS763 001517340 AMS-QQ-S-763 QQS763L1CL304CNDNA1IN HEX AMS-QQ-S-763L1 QQS763L1 QQS763L1CL304CNDNA1IN
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-926-4696 Metal Bar 9510009264696 009264696,QQS763
QQS763 001517340 AMS-QQ-S-763 QQS763L1CL304CNDNA1IN HEX AMS-QQ-S-763L1 QQS763L1 QQS763L1CL304CNDNA1IN
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-926-4696 Metal Bar 9510009264696 009264696,QQS763
QQS763 001517340 AMS-QQ-S-763 QQS763L1CL304CNDNA1IN HEX AMS-QQ-S-763L1 QQS763L1 QQS763L1CL304CNDNA1IN
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-926-4696 Metal Bar 9510009264696 009264696,QQS763
QQS763 001517340 AMS-QQ-S-763 QQS763L1CL304CNDNA1IN HEX AMS-QQ-S-763L1 QQS763L1 QQS763L1CL304CNDNA1IN
Restrictions 9510-00-926-4696
9510-00-926-4696 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9510-00-926-4696
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
Approved Sources 9510-00-926-4696
- Part Number
- Manufacturer
- Status
- QQS763
- Manufacturer
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- QQ-S-763L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9510-00-926-4696
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Hexagon
- Criticality Code Justification [CRTL]
- Zzzx
- Cross-Sectional Width Across Flats [BMNZ]
- 2.750 Inches Nominal
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Heat Treatment [HEAT]
- As Fabricated
- Material [MATT]
- Steel Comp 304
- Length [ABRY]
- 20.000 Feet Nominal
- Material Document And Classification [MDCL]
- Fed Std 66 Fed Std 1St Material Response Or Aisi 304 Assn Std Single Material Response Or Sae 30304 Assn Std Single Material Response
- Weight Per Unit Measure [BRFD]
- 22.270 Pounds Per Linear Foot
Management Data 9510-00-926-4696
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9510-00-926-4696
Freight Information 9510-00-926-4696
9510-00-926-4696 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 136500. A Sub NMFC of Z. It has a NMFC Description of METAL NOI/METAL ALLOYS NOI. 9510-00-926-4696 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 9510-00-926-4696 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 68455 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9510-00-926-4696 is not classified as a special type of cargo when transported by water. 9510-00-926-4696 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-00-926-4696
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 240.0" H x 2.8" W x 2.8" L
- --
- --
- --
- Special Requirements
- 240.0" H x 2.8" W x 2.8" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- ASTM-D6880, Class 2, Heavy Duty Wood Box
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement