Premium Information is available for this item - Upgrade for $1 a day
9510-00-229-4784
Metal Bar
9510002294784 002294784 AMS2806 ASTM A108 MS500105-015
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
November 2023
12
Marketplace 9510-00-229-4784
Request a Quotation from participating marketplace vendors
Related Documents 9510-00-229-4784 5+ Documents (More...)
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-229-4784 Metal Bar 9510002294784 002294784,AMS2806
ASTM-A108 BAR,METAL 73 FT NS Request Quotation ASTM A108 BAR,METAL 17 FT NS Request Quotation AMS2806
/fsg-95/fsc-9510/us 9510-00-229-4784 Metal Bar 9510002294784 002294784,AMS2806 Fs 1015 ,Or Steel,Astm
Quotation ASTM A108 ,Or Steel,Astm A108 Fs 1015 ,Or Steel,Astm A108 Fs 1016 https//www.nsnlookup.com
,Or Steel,Astm A108 Fs 1015 ,Or Steel,Astm A108 Fs 1016 https//www.nsnlookup.com Quotation ASTM A108
/fsg-95/fsc-9510/us 9510-00-229-4784 Metal Bar 9510002294784 002294784,AMS2806 Fs 1015 ,Or Steel,Astm
Fs 1018,Or Steel,Astm Fs 1010,Or Steel,Astm A108 Fs 1015 ,Or Steel,Astm A108 Fs 1016 ,Or Steel,Astm
Astm A108 Fs 1018,Or Steel,Astm Fs 1010,Or Steel,Astm A108 Fs 1015 ,Or Steel,Astm A108 Fs 1016 https/
Fs 1015 ,Or Steel,Astm A108 Fs 1016 ,Or Steel,Astm A108 Fs 1018,Or Steel,Astm Fs ,Or Steel,Astm
Fs 1015 ,Or Steel,Astm A108 Fs 1016 ,Or Steel,Astm A108 Fs 1018,Or Steel,Astm Fs ,Or Steel,Astm A108
Restrictions 9510-00-229-4784
9510-00-229-4784 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9510-00-229-4784
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9510-00-229-4784
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- Supplementary Receivers:
- AZCE
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
Approved Sources 9510-00-229-4784
- Part Number
- Manufacturer
- Status
- AMS2806
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- ASTM A108
- 81346 - American Society For Testing And (Active)
- Incomplete Reference
- Incomplete Reference
- MS500105-015
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS2806
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9510-00-229-4784
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Flat
- Cross-Sectional Thickness [ADVM]
- 0.3750 Inches Nominal
- Cross-Sectional Width [ADWH]
- 0.750 Inches Nominal
- Fabrication Method [AARN]
- Cold Rolled
- Heat Treatment [HEAT]
- As Fabricated
- Material [MATT]
- Steel Comp 1045
- Nondefinitive Spec/Std Data [ZZZT]
- 1045 Grade
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Material Document And Classification [MDCL]
- Astm A108, Grade 1045 Assn Std 1St Material Response
- Weight Per Unit Measure [BRFD]
- 0.956 Pounds Per Linear Foot
Weapon Systems (WSDC) 9510-00-229-4784
DLA Procurement Analysis 9510-00-229-4784
- Last Stock Position:
- 22 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9510-00-229-4784
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9510-00-229-4784
Freight Information 9510-00-229-4784
9510-00-229-4784 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-00-229-4784 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-00-229-4784 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-00-229-4784 is not classified as a special type of cargo when transported by water. 9510-00-229-4784 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-00-229-4784
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9510-00-229-4784 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: