Premium Information is available for this item - Upgrade for $1 a day
9510-00-119-1629
Metal Bar
9510001191629 001191629 AMS-QQ-S-763L1 QQS763L1CL304CNDNA1 1-2INRDL1 QQS763L1 QQS763L1CL304CNDNA1 1-2INRD QQS763 AMS-QQ-S-763
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
10
Marketplace 9510-00-119-1629
Request a Quotation from participating marketplace vendors
Related Documents 9510-00-119-1629 5+ Documents (More...)
Metal Bar 9510001191629 001191629 QQS763L1CL304CNDNA1 1-2INRD QQS763 AMS-QQ-S-763 A metallic product
QQS763CL304/304L/CNDA/1.5INHEX QQS763L1 AMS-QQ-S-763L1 QQS763CL304/304L/CNDA/1.5INHEXL1 QQS763 A
AMS-QQ-S-763 BAR,METAL 4 FT NS Request Quotation Subscribe to View Vendor Details...
Metal Bar 9510001191629 001191629 QQS763L1CL304CNDNA1 1-2INRDL1 QQS763L1 QQS763L1CL304CNDNA1 1-
AMS-QQ-S-763 BAR,METAL 4 FT NS Request Quotation Subscribe to View Vendor Details...
Metal Bar 9510001191629 001191629 QQS763L1CL304CNDNA1 1-2INRDL1 QQS763L1 QQS763L1CL304CNDNA1 1-
AMS-QQ-S-763 BAR,METAL 4 FT NS Request Quotation Subscribe to View Vendor Details...
Metal Bar 9510001191629 001191629 QQS763L1CL304CNDNA1 1-2INRDL1 QQS763L1 QQS763L1CL304CNDNA1 1-
AMS-QQ-S-763 BAR,METAL 4 FT NS Request Quotation Subscribe to View Vendor Details...
Metal Bar 9510001191629 001191629 QQS763L1CL304CNDNA1 1-2INRDL1 QQS763L1 QQS763L1CL304CNDNA1 1-
Restrictions 9510-00-119-1629
9510-00-119-1629 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9510-00-119-1629
- US Air Force (FGHD)
- Effective Date:
- 1 Apr 1991
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9510-00-119-1629
- Part Number
- Manufacturer
- Status
- AMS-QQ-S-763
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-S-763L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- QQS763L1CL304CNDNA1 1-2INRDL1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- QQS763L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- QQS763L1CL304CNDNA1 1-2INRD
- 81348 - Federal Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- QQS763
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-S-763
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9510-00-119-1629
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 1.500 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Heat Treatment [HEAT]
- As Fabricated
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
Management Data 9510-00-119-1629
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9510-00-119-1629
Freight Information 9510-00-119-1629
9510-00-119-1629 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-00-119-1629 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 9510-00-119-1629 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-00-119-1629 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-00-119-1629 is not classified as a special type of cargo when transported by water. 9510-00-119-1629 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-00-119-1629
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 1.5" W x 1.5" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 1.5" W x 1.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement