Premium Information is available for this item - Upgrade for $1 a day
9510-00-095-5554
Metal Bar
9510000955554 000955554 QQS764 ASTM-A582,TY 303,CND A,2 IN RD QQS764L1 ASTM-A582,TY 303,CND A,2 IN RDL1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
10
Marketplace 9510-00-095-5554
Request a Quotation from participating marketplace vendors
Related Documents 9510-00-095-5554 5+ Documents (More...)
QQS764L1 A metallic product of ferrous or nonferrous material.
) https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-060-6654 Metal Bar 9510000606654 000606654,QQS764
) https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-056-1758 Metal Bar 9510000561758 000561758,QQS764
https//www.nsnlookup.com /fsg-96/fsc-9640/us 9640-00-465-5694 Metal Round 9640004655694 004655694,QQS764
https//www.nsnlookup.com /fsg-96/fsc-9640/us 9640-00-465-5694 Metal Round 9640004655694 004655694,QQS764
your Account Upgrade 9505-00-689-4218Nonelectrical Wire9505006894218 006894218 ASTM A582 8984K11 QQS764
) https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-060-6654 Metal Bar 9510000606654 000606654,QQS764
) https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-056-1758 Metal Bar 9510000561758 000561758,QQS764
) https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-056-1945 Metal Bar 9510000561945 000561945,QQS764
https//www.nsnlookup.com /fsg-96/fsc-9640/us 9640-00-465-5694 Metal Round 9640004655694 004655694,QQS764
Restrictions 9510-00-095-5554
9510-00-095-5554 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9510-00-095-5554
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9510-00-095-5554
- Part Number
- Manufacturer
- Status
- QQS764
- Manufacturer
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- ASTM-A582,TY 303,CND A,2 IN RD
- 81348 - Federal Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- QQS764L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- ASTM-A582,TY 303,CND A,2 IN RDL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 9510-00-095-5554
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 2.000 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Fabrication Method [AARN]
- Any Acceptable
- Heat Treatment [HEAT]
- Annealed
- Material Document And Classification [MDCL]
- Qq-S-764, Type 303-Canceled Fed Spec 1St Material Response
- Material [MATT]
- Steel Comp 303
- Nondefinitive Spec/Std Data [ZZZT]
- A Condition And Pickled Finish And Round Form And 303 Type
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
- Surface Condition [SFCD]
- Machine Overall
Management Data 9510-00-095-5554
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9510-00-095-5554
Freight Information 9510-00-095-5554
9510-00-095-5554 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-00-095-5554 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 9510-00-095-5554 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-00-095-5554 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-00-095-5554 is not classified as a special type of cargo when transported by water. 9510-00-095-5554 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-00-095-5554
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 2.0" W x 2.0" L
- --
- --
- --
- Special Requirements
- 144.0" H x 2.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement