Premium Information is available for this item - Upgrade for $1 a day
9390-01-361-4748
Nonmetallic Channel
9390013614748 013614748 1681 ZZ-R-765/01-1681B5
A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL. View more Nonmetallic Channel
May 2023
4
Marketplace 9390-01-361-4748
Request a Quotation from participating marketplace vendors
Related Documents 9390-01-361-4748 2+ Documents (More...)
(Identification) 1/3 NSN 9390-01-361-4748 (Identification) 2/3 NSN 9390-01-361-4748 (Identification
Every 15 Minutes 9390-01-361-4748 BUY NE FedMall Updated Every Day 9390-01-361-4748 RQST NE Updated
Restrictions 9390-01-361-4748
9390-01-361-4748 is a Nonmetallic Channel that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 9390-01-361-4748
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9390-01-361-4748
- Part Number
- Manufacturer
- Status
- ZZ-R-765/01-1681B5
- Manufacturer
- 81348 - Federal Specifications Promulgated (Active)
- Definitive Standard
- Definitive Standard
- 1681
- 77969 - Rubbercraft Corporation Of (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9390-01-361-4748
- Characteristic
- Specifications
- FIIG
- Specifications
- A547C0
- Base Flange Thickness [AJGP]
- 0.062 Inches Nominal
- Criticality Code Justification [CRTL]
- Aasf And Aash
- Cross-Sectional Shape Style [AAGR]
- Open Channel
- Environmental Protection [ADZC]
- Low Temperature
- Material Document And Classification [MDCL]
- Zz-R-765, Class 1B, Grade 50 National Spec Single Material Response
- Material [MATT]
- Rubber Silicone
- Minimum Tensile Strength [AASH]
- 700 Pounds Per Square Inch
- Nonmetallic Hardness Rating [AASF]
- 45.0 Minimum Shore Durometer A And 55.0 Maximum Shore Durometer A
- Left Side Flange Thickness [ADXL]
- 0.062 Inches Nominal
- Left-Side Flange Tip Style [BHQU]
- Left W/ Outside Radius
- Right Side Flange Height [ADXK]
- 0.313 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.062 Inches Nominal
- Right-Side Flange Tip Style [CZLZ]
- Right W/ Outside Radius
- Overall Height [ABKW]
- 0.375 Inches Nominal
- Overall Width [ABMK]
- 0.188 Inches Nominal
- Special Features [FEAT]
- Low Compression Set At High Temperature,Grey
DLA Procurement Analysis 9390-01-361-4748
Management Data 9390-01-361-4748
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 9390-01-361-4748
Freight Information 9390-01-361-4748
9390-01-361-4748 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 156600. A Sub NMFC of Z. It has a NMFC Description of PLASTIC/RUBBER ARTICLE VIZ:. 9390-01-361-4748 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 77670 which rates the freight between FCL and LCL. 9390-01-361-4748 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 846 for ocean manifesting and military sealift. 9390-01-361-4748 is not classified as a special type of cargo when transported by water. 9390-01-361-4748 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9390-01-361-4748 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: