Premium Information is available for this item - Upgrade for $1 a day
9390-01-130-9617
Nonmetallic Channel
9390011309617 011309617 151C257H01
A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL. View more Nonmetallic Channel
May 2023
3
Marketplace 9390-01-130-9617
Request a Quotation from participating marketplace vendors
Related Documents 9390-01-130-9617 1+ Documents (More...)
NE FedMall Updated Every Day 9390-01-130-9617 RQST NE Updated Every Day 9390-01-130-9617 RQST Updated
Every Day 9390-01-130-9617 RQST NE Related Documents 9390-01-130-9617 1+ Documents ( More... ) https
Restrictions 9390-01-130-9617
9390-01-130-9617 is a Nonmetallic Channel that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 9390-01-130-9617
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9390-01-130-9617
- Part Number
- Manufacturer
- Status
- 151C257H01
- Manufacturer
- 97942 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 9390-01-130-9617
- Characteristic
- Specifications
- FIIG
- Specifications
- A547C0
- End Item Identification [AGAV]
- 100Kw Xmitter 616A Program
- Base Flange Thickness [AJGP]
- 0.060 Inches Nominal
- Cross-Sectional Shape Style [AAGR]
- Open Channel
- Environmental Protection [ADZC]
- Wear Resistant
- Fillet Radius Where Left Flange Joins Base Flange [AJGL]
- 0.120 Inches Nominal
- Fillet Radius Where Right Flange Joins Base Flange [AJGY]
- 0.120 Inches Nominal
- Material [MATT]
- Plastic Polyamide
- Left Side Flange Thickness [ADXL]
- 0.060 Inches Nominal
- Left-Side Flange Tip Style [BHQU]
- Left Square End
- Length [ABRY]
- 12.640 Inches Nominal
- Right-Side Flange Tip Style [CZLZ]
- Right Square End
- Right Side Flange Height [ADXK]
- 0.250 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.060 Inches Nominal
- Overall Height [ABKW]
- 0.250 Inches Nominal
- Overall Width [ABMK]
- 1.410 Inches Nominal
- Physical Form [AGXW]
- Solid
- Special Features [FEAT]
- Matl Is L-P-410 Cmsn Nylon 6/6
DLA Procurement Analysis 9390-01-130-9617
Management Data 9390-01-130-9617
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 9390-01-130-9617
Freight Information 9390-01-130-9617
9390-01-130-9617 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 156950. A Sub NMFC of X. It has a NMFC Description of PLASTIC/RUBR MOULDINGS CHANNELS ETC. 9390-01-130-9617 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 9390-01-130-9617 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 77775 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 772 for ocean manifesting and military sealift. 9390-01-130-9617 is not classified as a special type of cargo when transported by water. 9390-01-130-9617 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9390-01-130-9617 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: