9390-12-331-0848

7610-15-007-0061 7610150070061 150070061 is two or more sheets, written or printed,or stored on electonic media, containing no programs or software, outlining maintenance, installation and/or operating information applicable to one or more related pieces of equipment. it may have a cover. the sheets may be fastened by staple(s), loosely folded, and/or punched for loose-leaf binding. see also book. for single sheet items, see chart (as modified) and sheet, technical.

5350-01-152-9968 5350011529968 011529968 STONE,FINISHING SQUARE

5910-27-007-0061 5910270070061 270070061 is a capacitor whose capacitance value is controlled by a mechanical means which effects a continuous variation of its capacitance. it includes items consisting of two or more variable capacitors which are inseparable.

5905-01-007-0061 5905010070061 010070061 is an arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. the resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. excludes resistor, fixed (as modified); resistor assembly; resistor network, fixed-variable; and resistor set, matched.

2815-21-007-0061 2815210070061 210070061 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.