9390-12-164-7657

5305-14-260-0304 5305142600304 142600304 is an externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.

5330-00-260-0304 5330002600304 002600304

5315-01-260-0304 5315012600304 012600304 PIN,STRAIGHT,HEADLESS

5950-01-444-0036 5950014440036 014440036 is two or more coil, electrical on a common mounting or mounted on each other. excludes items inductively coupled. for items inductively coupled, see transformer (as modified).

5310-14-444-0036 5310144440036 144440036 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.