8910-25-143-6968

Documents 9510-17-117-6927 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-89/fsc-8910/no 8910-25-143-6968
Smelteost 8910251436968 251436968,1090.04 Documents 8910-25-143-6968 5+ Documents ( More... ) https

5340-01-126-1282 5340011261282 011261282 is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. excludes brace (as modified); bracket (1), mounting; and bracket, shelf.

4820-14-459-9479 4820144599479 144599479 is a valve designed to automatically release excessive pressures. it is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. it is not designed for regulation of continuously fluctuating loads. it may be inline or cartridge (manifold) design. excludes valve (1), relief, pressure and temperature.

3120-12-177-9764 3120121779764 121779764 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

3120-12-170-0970 3120121700970 121700970 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.