8470-01-575-2278

Documents 9310-00-981-7613 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-84/fsc-8470/us 8470-01-575-2278
Small Arms Protective Body Armor 015752278 interconnecting cabinet; junction box; and terminal
Day 9310-00-981-7613 RQST Updated Every Day 9310-00-981-7613 RQST NE Related Documents 9310-00-981-7613 2

Documents 5975-01-545-1878 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-84/fsc-8470/us 8470-01-575-2278
Small Arms Protective Body Armor 015752278 dimension will be used to determine compliance.) https

6220-00-631-2772 6220006312772 006312772 WORM ASSY

3040-00-922-8227 3040009228227 009228227 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

5310-99-540-8068 5310995408068 995408068 is a nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. for items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. see also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)