8430-15-202-4037

01375950994340137994340137 https//www.nsnlookup.com /fsg- https//www.nsnlookup.com /fsg-84/fsc-8430/it 8430-15-202-4037
Electrical Hazard Protective Boots 152024037 connections see memory, portable, solid state. https
uk 5950-99-434-0137 59509943401379943401375950-99-434-01375950994340137994340137 Restrictions 8430-15-202-4037

shoes, molders'; and shoes, nonsparking. https//www.nsnlookup.com /fsg-84/fsc-8430/it 8430-15-202-4037
Electrical Hazard Protective Boots 152024037 8430-15-202-4037 8430152024037 152024037 is footwear

Documents 5962-01-434-0137 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-84/fsc-8430/it 8430-15-202-4037
Electrical Hazard Protective Boots 152024037 mounting pad, electrical-electronic component. https

207-3795 Electrical Hazard Protective Boots 241141 T-48RNCC: 3 | RNVC: 2 | DAC: 2 20 Mar 2009 8430-15-202-4037

5365-14-434-0137 5365144340137 144340137 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.