8415-15-233-1226

Page 1 of 1 8415-15-233-1228 Guanti Da Lavoro In B8-9RNCC: 3 | RNVC: 2 | DAC: 5 19 Jul 2007 8415-15-233-1226

7501 Light Lens 6220014937501 014937501,A187542 https//www.nsnlookup.com /fsg-84/fsc-8415/it 8415-15-233-1226
Guanti Da Lavoro In 8415152331226 152331226 or threads. see bolt, machine and bolt, clevis. https

Pini & (CAGE Code A6223) 19 Jul 2007 8415-15-233-1226 Guanti Da Lavoro In B8-10RNCC: 3 | RNVC: 2

4720-01-127-2587 4720011272587 011272587 is a length of nonmetallic hose with fittings on one or both ends. for items without fittings, see hose, nonmetallic. excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

5306-00-128-6509 5306001286509 001286509 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.