8145-22-624-0599

5307142433019 142433019 https//www.nsnlookup.com /cage Sanistaal A/S (CAGE Code R3062) 2002 8145-22-624-0599

1055-00-172-6165 1055001726165 001726165 LAUNCHER ASSY,SMOKE

1650-01-172-6165 1650011726165 011726165 PISTON,CHECK VALVE

5365-12-172-6165 5365121726165 121726165 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

Plate 0418970RNCC: 3 | RNVC: 2 | DAC: 4DIN1017-80X10MMRNCC: 5 | RNVC: 2 | DAC: 4 20 Jun 2002 8145-22-624-0599