8140-00-040-7761

Documents 8140-00-829-7385 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-81/fsc-8140/us 8140-00-040-7761
Top Support 8140000407761 000407761,9260702 https//www.nsnlookup.com /cage Combat Capabilities

5935-00-926-0702 5935009260702 009260702 is an adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction.it is not designed for permanent attachment to a cable, cord, coaxial line, or wire.the physical shape of an electrical connector should not be the determining factor of its name.tee, angle, straight, and y-shaped adapters are all adapter, connector.excludes adapter, connector to lampbase; adapter, lampholder to connector; adapter (1), cable clamp to connector; and adapter, lampholder.for items designed as a mechanical connection between an electrical conduit and an electrical connector, see adapter (1), electrical conduit.

5935-00-924-2106 5935009242106 009242106

5310-99-924-2106 5310999242106 999242106 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

6 Sep 1967 8140-00-829-7385 Protector Tube 76-1-1124-21RNCC: 3 | RNVC: 2 | DAC: 1 6 Sep 1967 8140-00-040-7761