What is Federal Supply Class 8010?

FSC 8010 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 8010) in the USA for supply items codified in the category of Paints, Dopes, Varnishes, and Related Products.

What is NATO Supply Classification Class 8010?

NSC 8010 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 8010 in the USA) for supply items codified in the category of Paints, Dopes, Varnishes, and Related Products.

Which Federal Supply Group is FSC 8010 in?

FSC 8010 is in Federal Supply Group (FSG) 80 which contains Brushes, Paints, Sealers, and Adhesives.

Which NATO Supply Classification Group is NSC 8010 in?

NSC 8010is in NATO Supply Classification Group (NSG) 80 which contains Brushes, Paints, Sealers, and Adhesives.

What is an Oil Paint?

An Oil Paint (PAINT,OIL) is a paint that uses drying oil or drying oil modified with varnish as the principal nonvolatile component of the vehicle. The total drying oil content, including the oil in the varnish when varnish is used, must be greater than 75 percent, by weight, of the total nonvolatile portion of the vehicle. See also ENAMEL. Excludes PAINT,HEAT RESISTING; PAINT,STENCIL; PAINT,TRAFFIC; P AINT,ANTIFOULING and PRIMER COATING.

A Lacquer is a clear or pigmented liquid coating composition which, when applied in a thin layer, sets and dries rapidly to form a solid film chiefly by evaporation of the solvent portion of the vehicle. It is composed basically of a cellulose derivative and/or a blend of resins such as vinyl, arcylic, polystyrene, and the like, mixed in a solvent, with or without the addition of plasticizers. Excludes SHELLAC, CUT; PAINT, RUBBER; PAINT, ANTIFOULING; DOPE and all items that are mechanically strippable.

A Stain is a liquid or powder composition that colors porous or nonporous material such as wood, snow, and the like. It may be transparent or translucent. It may be a dye dissolved in water, alcohol, or in toluene liquid. It may be a mixture of colored pigment, drying oil, and thinner, or a mixture of colored pigment or dye and varnish. It may be a mixture of colored pigment, wood preservative, drying oil and thinner commonly used for staining shingles. Excludes WATER COLOR.

An Enamel is pigment dispersed in a varnish vehicle containing natural or synthetic resin. The varnish may be modified with drying oil to the extent that the total drying oil content of the vehicle, including the oil in the varnish, does not exceed 75 percent, by weight, of the total nonvolatile portion of the vehicle. When applied in a thin layer, it dries principally by polymerization and/or oxidation to form a hard, smooth, opaque film. Excludes LACQUER; ENAMEL, HEAT RESISTING; bituminous and ceramic coatings and GOLD SIZE.

What is an Oil Varnish?

An Oil Varnish (VARNISH,OIL) is a liquid composition of drying oil(s) and resin which is specifically compounded to produce a transparent or translucent hard finish after application as a thin layer. It may have other incidental values, such as resistance to fungus, and a degree of electrical insulation. It dries and sets by evaporation, oxidation and polymerization. For items specifically compounded primarily for electrical insulating characteristics, see INSULATING VARNISH, ELECTRICAL. Excludes bituminous base items. See also LACQUER; PAINT (as modified) and ENAMEL.

What is a Cut Shellac?

A Cut Shellac (SHELLAC,CUT) is dry shellac dissolved in alcohol. It may contain pigment or dye.

What is an Antifouling Paint?

An Antifouling Paint (PAINT,ANTIFOULING) is the last coat of paint applied to the hull of a ship or surfaces of other items which are exposed to sea water, and contains toxic ingredients, such as red or yellow mercuric oxide, or red cuprous oxide. These toxic substances prevent the attachment of barnacles and other marine growth.

What is a Stencil Paint?

A Stencil Paint (PAINT,STENCIL) is a lusterless paint designed primarily for stencilling.

What is a Primer Coating?

A Primer Coating is a coating primarily formulated to form a bond and/or protective coating between the surface and the succeeding coat of paint, enamel or lacquer. Excludes DOPE; COATING COMPOUND, METAL PRETREATMENT, RESIN-ACID; bituminous base coatings and items primarily formulated as sealers, surfacers or adhesives.

What is a Liquid Surfacer?

A Liquid Surfacer (SURFACER,LIQUID) is a liquid composition mainly used to establish a smooth surface for subsequent application of a top coat, the nonvolatile portion of which contains pigments, varnish, drying oils, and/or resins. Excludes cement coatings.

What is a Rubber Paint?

A Rubber Paint (PAINT,RUBBER) is a paint whose basic vehicle is synthetic and/or natural rubber in solution form. Excludes PAINT, ANTIFOULING; and PAINT, LATEX.

What is a Fluorescent Coating Compound?

A Fluorescent Coating Compound (COATING COMPOUND,FLUORESCENT) is a compound for application on objects so that the markings may be visible in the dark during exposure to ultraviolet rays.

What is a Traffic Paint?

A Traffic Paint (PAINT,TRAFFIC) is a paint used for marking streets, highways, airport runways, and the like. Excludes WALKWAY COMPOUND, NONSLIP.

What is a Surface Sealer?

A Surface Sealer (SEALER,SURFACE) is a conposition in liquid form primarily used to seal porous surfaces, the nonvolatile portion of which contains varnish, drying oils, and/or resins. Excludes FILLER, WOOD; PRIMER COATING; bituminous coating and rubber; and rubber base coatings.

What is a Temporary Paint?

A Temporary Paint (PAINT,TEMPORARY) is a paint designed for easy removal by gasoline, soap and water, mineral spirits, and/or aliphatic naphtha. Excludes PAINT, FACE, CAMOUFLAGE.

What is a Heat Resisting Paint?

A Heat Resisting Paint (PAINT,HEAT RESISTING) is a paint that has the quality to withstand temperatures of 400 degrees Fahrenheit (204.44 Celsius) and higher. See also ENAMEL, HEAT RESISTING.

What is a Bullet Tip Coating Compound?

A Bullet Tip Coating Compound (COATING COMPOUND,BULLET TIP) is a pigment(s) dispersed in a vehicle composed of wax, thinner(s) and/or solvents. Used for coating the tips of projectiles of small arms ammunition for scoring purposes during target practice.

What is a Polyurethane Coating?

A Polyurethane Coating is a coating material in which the basic film-forming component is polyurethane, oil modified polyurethane, or resin modified polyurethane. It may be pigmented.

What is an Epoxy Coating Kit?

An Epoxy Coating Kit is a finish coat material composed of a base compound and an accelerator. The base material consists of an epoxy resin which is a reaction product of epichlorohydrin. The activator is normally a polyamide, polyamine, or similar compound. Usually, for colored epoxy finishes, only the base material contains pigment or dye, but both base and activator may be colored. The material may also be furnished with pigment separate from both base compound and accelerator.

What is an Epoxy Primer Coating Kit?

An Epoxy Primer Coating Kit is a base coating material used as a primer for succeeding epoxy finish coatings. It is usually furnished as a kit composed of an activator and a base compound.

What is a Latex Paint?

A Latex Paint (PAINT,LATEX) is a paint whose basic vehicle is a synthetic polymer in water emulsion form. Excludes PAINT, ANTIFOULING; and PAINT, RUBBER.

What is a Paint Products Thinner?

A Paint Products Thinner (THINNER,PAINT PRODUCTS) is a straight or blended run of petroleum naphthas with aniline point of not less than 100 degrees fahrenheit (37.98 celsius), or hydrocarbons of intermediate solvent powder used in thinning paints, varnish, enamel and other coating compounds. Excludes NAPTHA (as modified), specific chemicals, thinner used in ink, sealing compounds and adhesives.

What is a Paint Products Activator?

A Paint Products Activator (ACTIVATOR,PAINT PRODUCTS) is a formulation, when added to paint products, lacquers, and coatings, initiates a chemical reaction. Includes catalysts, additives, curing agents, and the like. Excludes those activators used in ink, plastic, rubber, sealing compounds and adhesives.

What is a Water Paint?

A Water Paint (PAINT,WATER) is a paint that uses water as a basic ingredient. It may also consist of pigments and extenders in an emulsion solution used as a binder, oil-modified alkyd or other resins and drying oils. The water-dispersible oils may be provided separately. Excludes WATER COLOR.

What is a Paint Products Pigment?

A Paint Products Pigment (PIGMENT,PAINT PRODUCTS) is a natural or synthetic, substantially insoluble, inorganic or organic substance which imparts color and hiding power, and is used in making paints, enamels and coating materials. It my be in powder, pellet, flake, or paste form. Paste items are pigments which are ground in drying oils or varnish, with or withour small amounts of volatile thinner, wetting and dispersing agents, or pigments ground in Japan. Excludes pigments used in ink, plastic, rubber, sealing compounds, and adhesives.

What is a Nonslip Coating Compound?

A Nonslip Coating Compound (COATING COMPOUND,NONSLIP) is a material which produces a nonslip surface on such areas as flight decks, walkways, other floor areas, and the like. Excludes DECK AND FLOOR COVERING SURFACE COMPOUND.

What is a Paint Filler?

A Paint Filler (FILLER,PAINT) is a paint designed for application by brush or spray to a primed surface to fill in minor surface imperfections. When fully hardened it is lightly sanded to produce a smooth surface for the subsequent application of finishing coats.

What is a Powder Coating?

A Powder Coating (COATING,POWDER) is an item comprised of resin(s) and pigment(s) designed to be pneumatically fed from a supply reservoir to a spray gun where a low amperage, high voltage charge is imparted to the powder particles. The part to be coated is electrically grounded so that the charged particles are attracted to the part. The powder is normally "set" by heat. Excludes PAINT, FINGER; PAINT, WATER, POWDER; FINGERPRINT, POWDER.

Paints, Dopes, Varnishes, and Related Products - United Kingdom (UK)

Federal Supply Class (FSC): 8010

NATO Supply Classification Class (NSC): 8010

Federal Supply Group (FSG): 80 Brushes, Paints, Sealers, and Adhesives

NATO Supply Classification Group (NSG): 80 Brushes, Paints, Sealers, and Adhesives

Items Managed by United Kingdom (UK) - NCB is 99

Page 8 of 13

NSN Format for Paints, Dopes, Varnishes, and Related Products
Codified by United Kingdom

80	10	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 8010 is a classification within NATO Supply Group 80, which encompasses Brushes, Paints, Sealers, and Adhesives.

Class 8010 specifically refers to Paints, Dopes, Varnishes, and Related Products. These products are used for various purposes such as coating, protecting, and enhancing the appearance of surfaces.

Paints are liquid or semi-solid substances that are applied to surfaces to provide color, protection, and decoration. They can be used on a wide range of materials including wood, metal, and concrete.

Dopes are specialized coatings used primarily in the aerospace industry. They are applied to fabric-covered aircraft to provide protection against weathering and to enhance the aerodynamic properties of the aircraft.

Varnishes are transparent or semi-transparent coatings that are applied to surfaces to provide a glossy or matte finish. They are commonly used on wood surfaces to enhance their appearance and protect them from damage.

Related products in this class may include primers, thinners, solvents, and other substances used in conjunction with paints, dopes, and varnishes. These products are often necessary for proper application and maintenance of the coatings.

The NATO Supply Class 8010 is important for military and defense purposes as it ensures that the necessary paints, dopes, varnishes, and related products are available for use in various applications, including maintenance, repair, and operational activities.

FSC 8010 Paints, Dopes, Varnishes, and Related Products - United Kingdom (UK)

Includes Water Paints; Oil Paints and Latex; Driers; Paint Primers; Lacquers; Paint Sealers; Pigments for Coloring; Stains; Turpentine; Paint Removers.

Frequently Asked Questions(FAQ) for Federal Supply Class 8010

Supply Items Included in Federal Supply Class 8010

Stock Items From Supply Class 8010 Page 8 of 13