8010-15-060-9777
Synthetic Thinner
8010150609777 150609777 148-101-003 148.101.003 D35 6-C-82 506-90-82
Managed by Italy
NSN Created on 30 Jan 1985
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 8010-15-060-9777
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 8010-15-060-9777 5+ Documents (More...)
| DAC: 1 27 Oct 1981 8010-15-008-4981 Enamel 26-E-104RNCC: 3 | RNVC: 2 | DAC: 1 27 Oct 1981 8010-15-060-9777
DEMILI : 1 | CRITICALITY : X | HMIC : N | PMIC : A | EDC: A | ADPEC : 0 3110-01-495-9878 is a Snapring D35
DEMIL: | DEMILI : | CRITICALITY : | HMIC : | PMIC : | EDC: | ADPEC : 1005-33-001-5702 is a Soporte D35
| DEMILI : | CRITICALITY : | HMIC : | PMIC : | EDC: | ADPEC : 1005-33-001-4191 is a Columna Llenado D35
5306-01-265-4801 5306012654801 012654801 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Restrictions 8010-15-060-9777
End Users 8010-15-060-9777
- Germany (ZG)
- Italy (ZR)
Approved Sources 8010-15-060-9777
- Part Number
- Manufacturer
- Status
- 148-101-003
- Manufacturer
- A1997 - Elettronica Spa (Active)
- Primary Buy
- Primary Buy
- 148.101.003
- A1997 - Elettronica Spa (Active)
- Secondary Buy
- Secondary Buy
- D35
- A1997 - Elettronica Spa (Active)
- Secondary Buy
- Secondary Buy
- 6-C-82
- A2272 - Glidden Salchi Spa (Active)
- Secondary Buy
- Secondary Buy
- D35
- C3141 - Elettronica Gmbh (Active)
- Secondary Buy
- Secondary Buy
- 506-90-82
- A2272 - Glidden Salchi Spa (Active)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 8010-15-060-9777
8010-15-157-7512 8010-15-157-7505 8010-27-003-9819 8010-26-300-8293 8010-15-156-6644 8010-13-234-3906 8010-25-111-7248 8010-15-008-4992 8010-21-885-1410 8010-13-114-3070 8010-21-870-3477 8010-21-859-4133 8010-21-893-3282 8010-98-204-0736 8010-26-300-6352 8010-33-107-2631 8010-15-204-6900 8010-15-000-3100