7920-14-577-4606

7920144697290144697290 Documents 7920-14-469-7290 2+ Documents ( More... ) https//www.nsnlookup.com 7920145774606
145774606 France (FR) Running Gear Brush 611A13RNCC: 3 | RNVC: 2 | DAC: 4 14 Mar 1990 7920-14-469-7290
https//www.nsnlookup.com /fsg-79/fsc-7920/fr 7920-14-577-4606 Scra Wire Brush Set 7920145774606 145774606

And Running Gear Brush 611A13RNCC: 3 | RNVC: 2 https//www.nsnlookup.com /fsg-79/fsc-7920/fr 7920-14-577-4606
Scra Wire Brush Set 7920145774606 145774606 France (FR) Running Gear Brush 611A13RNCC: 3 | RNVC

4 19 Sep 2013 4720-14-577-5008 Nonmetallic Hose 170332RNCC: 3 | RNVC: 2 | DAC: 4 19 Sep 2013 7920-14-577-4606

Running Gear Brush 611A13RNCC: 3 | RNVC: 2 | DAC: 4 14 Mar 1990 7920-14-469-7290 7920-14-255-9589 7920-14-577-4606

5310-15-118-5008 5310151185008 151185008 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.