7730-21-895-9348

Documents 7730-21-909-8899 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-77/fsc-7730/ca 7730-21-895-9348
Television/Radio/Re 7730218959348 218959348 www.nsnlookup.com /fsg-77/fsc-7730 Phonographs, Radios

1983 5835-21-906-8774 Sound Recorder-Reproducer 14-1015RNCC: 3 | RNVC: 2 | DAC: 4 26 Aug 1989 7730-21-895-9348

1550-15-130-5519 1550151305519 151305519 TESTER

5310-01-579-3833 5310015793833 015793833 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-01-583-8820 5310015838820 015838820 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.