7644-01-560-0536

5940-99-624-1291 5940996241291 996241291 is an item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. it is usually used for junctions or terminations of wire or cable assemblies. it does not include items as defined above with parts, such as resistors and capacitors mounted thereon. do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). excludes terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. for items having printed electrical conductor paths, see printed wiring board.

5440-21-799-2357 5440217992357 217992357 is a self-supporting ladder of fixed size consisting of front and rear sections which are hinged at the top. it is usually constructed with steps on the front section only but may be constructed as a trestle type unit with identical front and rear sections utilizing either steps or rungs.

3110-99-456-7440 3110994567440 994567440 is a cylindrical item in which the inner or outer ring turns upon row(s) of hardened ball, bearing which roll on a raceway, thus minimizing friction. these items are characterized by their noncorrosive qualities, lightness of weight, inch dimensions rather than metric, inner rings generally projecting beyond the faces of the outer ring, or a very narrow width inner ring having an outside diameter slightly larger than the bore diameter. designed primarily for use in aircraft assemblies, such as control systems and surfaces of aircraft. excludes bearing, ball, annular.

4730-14-466-8275 4730144668275 144668275 is a fitting having four branches in the same plane whose axes form right angles. the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. it is designed to be used as a junction at the intersection of tubing and/or tube fittings. it may have side inlet(s).