7530-01-435-5068

DAC: 4 26 Aug 1996 5335-01-435-5067 Wire Fabric 800653RNCC: 3 | RNVC: 2 | DAC: 4 26 Aug 1996 7530-01-435-5068

6150-01-108-2061 6150011082061 011082061 is a definite continuous length of cable, special purpose, electrical with branches (forks), and having one or more ends processed and/or terminated in fittings to provide for connection to other items. excludes lead, test. see also wiring harness.

5998-66-108-2061 5998661082061 661082061 is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar

8405-17-108-2061 8405171082061 171082061 is a two-piece weather-resistant garment consisting of a coat with or without a hood and trousers. it is used to protect the wearer against the rain.

5305-33-108-2061 5305331082061 331082061 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.