7510-00-370-1125

5310-99-974-7014 5310999747014 999747014 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

1620-14-318-5733 1620143185733 143185733 BIELLE,CDE CREMAILL

1680-99-418-3575 1680994183575 994183575 RING,RETAINING

3040-14-306-4103 3040143064103 143064103 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

5340-14-212-3471 5340142123471 142123471 is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. it is not designed to retain fluids under pressure during equipment operation. excludes cover, electrical connector; hood, sealing, bottle; and stopper, bottle. for items designed to fit into or over the opening(s) of various items, see cap-plug, protective, dust and moisture seal.