7510-17-115-3701

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Paper Clip (INC 03397) DAC: 3 18 Mar 2005 7510-17-115-3701

DAC: 9 24 Mar 2003 7510-98-206-2184 Paper Clip 66667736RNCC: 3 | RNVC: 2 | DAC: 3 18 Mar 2005 7510-17-115-3701

3040-01-346-4031 3040013464031 013464031 is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. it usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. it may have accommodations for locking and/or positioning. the point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link,rigid; wire rope assembly,single leg; and clevis,rod end; and the like. excludes arm (as modified); lever,remote control; and bell crank.

3040-01-346-1756 3040013461756 013461756 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

3040-01-346-4032 3040013464032 013464032 is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. it usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. it may have accommodations for locking and/or positioning. the point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link,rigid; wire rope assembly,single leg; and clevis,rod end; and the like. excludes arm (as modified); lever,remote control; and bell crank.