7510-22-622-9299

-22-622-9358 Electrical Insulation Tape 53948-00009-07RNCC: 3 | RNVC: 2 | DAC: 4 20 Sep 2011 7510-22-622-9299

DAC: 4 20 Sep 2011 8135-22-622-9221 Gummed Tape 2018960RNCC: 5 | RNVC: 2 | DAC: 4 19 Sep 2011 7510-22-622-9299

7510-22-622-9344 7510226229344 226229344 is a flexible item in roll form, six inches (152.4mm) 0r less in width, designed to be affixed to an object by adhesion. it does not contain coding signification, legendary characters, or printed data of any type. includes masking tape. excludes tape, adhesive, rubber; tape, insulation, electrical; tape, semi-conducting, electrical; and tape, shielding, electrical.

5998-15-201-9001 5998152019001 152019001 is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar

5310-01-201-9001 5310012019001 012019001 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.