7310-12-317-0664

2005 4520-12-355-8596 Hot Water Storage Tank 79 21 01 02RNCC: 3 | RNVC: 2 | DAC: 3 20 Dec 2001 7310-12-317-0664

4810-15-060-0095 4810150600095 150600095 is a valve designed to automatically maintain within close limits a predetermined outlet pressure which may be adjustable within a specified range regardless of the higher fluctuating or constant inlet pressure. it is designed for use with compressed gas(es) and various liquids and may include gauges. it may be inline or cartridge (manifold) design. excludes regulator, pressure, medical gas administration apparatus; regulator, oxygen, barometric continuous flow; regulator, oxygen demand; regulator, oxygen diluter demand; and valve(1), fluid pressure regulating, aircraft.

5975-27-060-0095 5975270600095 270600095 is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. it may include clinch nuts or fastening devices as part of the item. excludes panel, blank.

5305-00-060-0095 5305000600095 000600095

5365-99-622-9376 5365996229376 996229376 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.