7050-00-418-4408

5310-01-200-1312 5310012001312 012001312 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5340-20-002-2769 5340200022769 200022769 is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. excludes brace (as modified); bracket, angle; and bracket, double angle. see also bracket (1), electrical connector; bracket, fire extinguisher; bracket, solenoid; bracket, track, sliding door; and retainer (as modified).

5310-14-200-1312 5310142001312 142001312 is a nut formed from sheet spring material, usually steel, into varying flat, concave, bent or curved designs, having apertures with suitable boss or bosses usually on the upper side capable of securely gripping a mating threaded member. excludes nut (1), stamped.

5340-33-200-1312 5340332001312 332001312 is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). it is designed to retain and/or position the items close to a structure. it may be fastened to the structure on one end, both ends, or in the center. see also clamp, loop. excludes bracket, pipe; strap, leather and strap, webbing.

7530-98-200-1312 7530982001312 982001312 is a paper tape in continuous flat fold or roll form for ink-ribbon imprinting. excludes paper, shorthand machine; tape, teletypewriter, perforator; tape, teletypewriter, recorder.