Premium Information is available for this item - Upgrade for $1 a day
7035-01-291-6468
Magnetic Eraser
7035012916468 012916468 905-0001 TYPE II 900-0001 902-0001
An item which is specifically designed to disorientate the magnetic signal induced on tape or wire in preparation for the recording of another signal. View more Magnetic Eraser
January 2023
4
Marketplace 7035-01-291-6468
Request a Quotation from participating marketplace vendors
Related Documents 7035-01-291-6468 5+ Documents (More...)
Request a Quotation from participating marketplace vendors Request Updated Every Day 1010-21-905-0001
RQST NE Updated Every Day 1010-21-905-0001 RQST Updated Every Day 1010-21-905-0001 RQST NE Restrictions
United Kingdom (UK) 4. 1285-99-900-0001 Marketplace Restrictions Approved Sources Datasheet Management
Request a Quotation from participating marketplace vendors Request Related Documents 1285-99-900-0001
United States (US) 4. 5950-00-902-0001 Marketplace Restrictions Approved Sources Datasheet Management
Request a Quotation from participating marketplace vendors Request Updated Every Day 5950-00-902-0001
Restrictions 7035-01-291-6468
IUID Required
7035-01-291-6468 is a Magnetic Eraser that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is ADP supplies or support equipment. It may be consumable supplies such as continuous flat fold paper, sheet paper, seal bands, tape, empty tape reels and hubs, tape canisters or tape carrying cases. It may also be support equipment such as magnetic tape testing, certifying and cleaning equipment, disk pack testing, certifying and cleaning equipment, tape winders snd splicers or card reconditioners.
Import and Export 7035-01-291-6468
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 7035-01-291-6468
- US Air Force (FGG4)
- Effective Date:
- 1 Apr 1991
Approved Sources 7035-01-291-6468
- Part Number
- Manufacturer
- Status
- 905-0001
- Manufacturer
- 0B8L1 - Data Security, Inc. (Active)
- Primary Buy
- Primary Buy
- TYPE II
- 92739 - Ampex Systems Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 900-0001
- 0B8L1 - Data Security, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 902-0001
- 0B8L1 - Data Security, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 7035-01-291-6468
- Characteristic
- Specifications
- FIIG
- Specifications
- T207-B
- Erase Current Rating [ANXG]
- 16.0 Amperes Nominal
- Erase Voltage In Volts [ANXH]
- 208.0 Nominal
- Erasing Method [ANXB]
- Magnetic Field
- Magazine Quantity Accommodated [ANXD]
- 1
- Magnet Type [ANXF]
- Electromagnet
- Reel Quantity Accommodated [ANXC]
- 1
- Overall Height [ABKW]
- 11.875 Inches Nominal
- Overall Length [ABHP]
- 34.625 Inches Nominal
- Overall Width [ABMK]
- 23.250 Inches Nominal
- Special Features [FEAT]
- Accepts Reels Up To 14" Diameter And 2" In Height, Eight 1/2" Computer Cartridges Per Cycle, Nine 1/4" Computer Cartridges Per Cycle, Two 10 1/2" Computer Reels Per Cycle, Four Vhs Cassettes Per Cycle, 1/2 Height Hard Drives W/O Disassembly; -90 Db Minimum Using Standardized, Over Saturated, Long Wave Length Signals, Declassifies Media Up To 750 Oersteds
Management Data 7035-01-291-6468
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Dec 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 7035-01-291-6468
Freight Information 7035-01-291-6468
7035-01-291-6468 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 116030. A Sub NMFC of A. It has a NMFC Description of MACHINES,SYSTEMS OR DEVICES, DATA. 7035-01-291-6468 is rated as class 400 when transported by Less-Than Truckload (LTL) freight. 7035-01-291-6468 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 59295 which rates the freight between FCL and LCL. 7035-01-291-6468 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 738 for ocean manifesting and military sealift. 7035-01-291-6468 is not classified as a special type of cargo when transported by water. 7035-01-291-6468 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 7035-01-291-6468
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- 2 inches thick
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement