7035-14-488-6104

5905-14-349-4471 5905143494471 143494471 is a device for reducing the strength of an alternating current signal by a fixed or predetermined amount, without causing appreciable signal distortion, by maintaining correct impedance match.

3020-99-933-1414 3020999331414 999331414 is a gear with teeth on its outer surface in the form of helical threads.

3130-14-411-1660 3130144111660 144111660 is a single or multiple piece item without ball, plain or roller bearing(s). it is designed to meet various or specific conditions of mounting. for items with bearings, see bearing unit, ball; bearing unit, plain; and bearing unit, roller.

5310-01-597-4721 5310015974721 015974721 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

4730-99-807-9288 4730998079288 998079288 ADAPTER,STRAIGHT,PI