6930-14-377-2640

5310-00-067-6997 5310000676997 000676997 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

4935-01-299-9173 4935012999173 012999173 is a test set primarily designed for use in making examinations of electronic components, circuits, and/or electrically controlled systems within a guided missile. excludes individual test sets designed for a single specific function.

Request a Quotation from participating marketplace vendors Request Related Documents 1990-99-812-2598 2

Request a Quotation from participating marketplace vendors Request Related Documents 1560-00-562-2598 2

Request a Quotation from participating marketplace vendors Request Related Documents 5975-22-118-2598 2