6910-66-129-9647

RNVC: 2 | DAC: E 22 May 1982 6910-66-129-9640 Chart WC26RNCC: 3 | RNVC: 2 | DAC: E 28 Aug 1987 6910-66-129-9647

www.nsnlookup.com /cage Surmed Educational Supplies Pty Ltd (CAGE Code Z4700) RNVC: 2 | DAC: E 28 Aug 1987 6910-66-129-9647

2530-00-353-3011Hydraulic Brake Wheel Cylinder Assembly Parts Kit2530003533011 003533011 82-S F5379 WC18
Buy RNCC 5 RNVC 2 DAC 5 F5379 63477 - Federal Mogul Corp (Active) Secondary Buy RNCC 5 RNVC 2 DAC 5 WC18

3120-99-209-9994 3120992099994 992099994 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

3120-99-209-5003 3120992095003 992095003 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.