6740-00-998-3735

]Eastman Kodak Rt Color Processor Model 1411C-M https//www.nsnlookup.com /fsg-67/fsc-6740/us 6740-00-998-3735
6740009983735 009983735,459044 -998-3735 CharacteristicSpecificationsFIIGA23900End Item Identification

4720-14-501-2308 4720145012308 145012308 is a length of nonmetallic hose with fittings on one or both ends. for items without fittings, see hose, nonmetallic. excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

5365-17-103-4637 5365171034637 171034637 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

5365-14-442-7606 5365144427606 144427606 is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.