6685-14-295-0155

4810-00-102-6751 4810001026751 001026751 is a valve having two or more ports with valve stem or pilot needle in a normally open or closed position. it is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. the valve may be equipped with a manual opening or closing device. for items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. it may be inline or cartridge (manifold) design. excludes valve (1), butterfly.

5310-21-102-6751 5310211026751 211026751

5998-15-102-6751 5998151026751 151026751 is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar

5365-01-102-6751 5365011026751 011026751 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.