Premium Information is available for this item - Upgrade for $1 a day
6680-00-528-4915
Flexible Shaft Assembly
6680005284915 005284915 1584307
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL. View more Flexible Shaft Assembly
May 2023
6
Marketplace 6680-00-528-4915
Request a Quotation from participating marketplace vendors
Related Documents 6680-00-528-4915 3+ Documents (More...)
Every Day 6680-00-528-4915 RQST Updated Every Day 6680-00-528-4915 RQST NE Related Documents 6680-00
Shaft Assembly 6680005284915 BUY NE FedMall Updated Every Day 1584307 RQST NE Updated Every Day 6680
https//www.nsnlookup.com /fsg-65/fsc-6515/us 6515 https//www.nsnlookup.com /fsg-66/fsc-6680/us 6680-00-528-4915
Flexible Shaft Assembly 6680005284915 a day Upgrade your Account Upgrade 6680-00-528-4915Flexible
Pharyngeal Airway 6515016919603016919603 Account https//www.nsnlookup.com /fsg-66/fsc-6680/us 6680-00-528-4915
Flexible Shaft Assembly 6680005284915 Upgrade your Account Upgrade 6515-01-691-9603Pharyngeal Airway6515016919603
Restrictions 6680-00-528-4915
6680-00-528-4915 is a Flexible Shaft Assembly that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 6680-00-528-4915
- US Air Force (FXGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FXCX
Approved Sources 6680-00-528-4915
- Part Number
- Manufacturer
- Status
- 1584307
- Manufacturer
- 70040 - General Motors Llc (Obsolete)
- Original Design
- Original Design
- 1584307
- 7X677 - General Motors Llc (Active)
- Secondary Buy
- Secondary Buy
- 1584307
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 6680-00-528-4915
- Characteristic
- Specifications
- FIIG
- Specifications
- T246-E
- Distance From End To Groove Center [ANTT]
- 1.000 Inches Nominal First End
- Distance From End To Groove Center [ANTT]
- 0.531 Inches Nominal Second End
- End Connection Type [AWZY]
- Threaded Internal Both Ends
- Casing Length Between Ferrules [CFRP]
- 100.000 Inches Nominal
- Casing Outside Diameter [CFRQ]
- 0.469 Inches Nominal
- Casing Protective Device Type [CFRR]
- Coiled Spring Protector And Rubber Cover
- Casing Surface Treatment [CFRN]
- Galvanized
- Core Diameter [AKMH]
- 0.203 Inches Nominal
- Core Material [AJXJ]
- Steel
- Core Overall Length [CFRZ]
- 101.203 Inches Nominal
- Core Removability [CFSL]
- Removable
- Core Rotation Direction [CFSB]
- Clockwise
- Core Surface Treatment [AKMF]
- Galvanized
- Cross Section Size And Location [CFQW]
- 0.104 Inches Nominal Across Flats Second End
- Cross Section Size And Location [CFQW]
- 0.203 Inches Nominal Diameter First End
- End Overall Diameter [CFRW]
- 0.750 Inches Nominal First End
- End Overall Diameter [CFRW]
- 0.625 Inches Nominal Second End
- End Type [APTD]
- Round Keyed First End
- End Type [APTD]
- Square Male Second End
- Fsc Application Data [ZZZV]
- Speedometer
- Groove Quantity [AXHQ]
- 2 Second End
- Groove Quantity [AXHQ]
- 1 First End
- Groove Width [ABGF]
- 0.156 Inches Nominal First End
- Groove Width [ABGF]
- 0.188 Inches Nominal Second End
- Casing Material [BJPS]
- Steel
- Minimum Operating Radius [CGDN]
- 3.500 Inches
- Lubrication Fitting [CFRY]
- Not Provided Both Ends
- Screw Thread Series Designator [AJYP]
- Unf Second End
- Screw Thread Series Designator [AJYP]
- Uns First End
- Setscrew [BDRL]
- Not Included Both Ends
- Shank Outside Diameter [AGGZ]
- 0.500 Inches Nominal Both Ends
- Shoulder Outside Diameter [AGPX]
- 0.875 Inches Nominal First End
- Overall Length [ABHP]
- 101.266 Inches Nominal
- Width Across Flats [ASDB]
- 0.750 Inches Nominal Second End
- Wrenching Facility Type [BPPL]
- Hexagon Both Ends
- Swivel End [CFRT]
- Not Provided Both Ends
- Thread Class [AAJD]
- 2B First End
- Thread Class [AAJD]
- 2B Second End
- Thread Direction [AAJF]
- Right-Hand Both Ends
- Thread Length [AASA]
- 0.312 Inches Nominal First End
- Thread Length [AASA]
- 0.375 Inches Nominal Second End
- Thread Location [APJC]
- Internal Both Ends
- Tip Length [AEDN]
- 0.375 Inches Nominal Second End
- Tip Length [AEDN]
- 0.828 Inches Nominal First End
DLA Procurement Analysis 6680-00-528-4915
Management Data 6680-00-528-4915
Similar Supply Items to 6680-00-528-4915
Freight Information 6680-00-528-4915
6680-00-528-4915 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 129920. A Sub NMFC of X. It has a NMFC Description of SHAFTS/SHAFTING,FLEX NOI STL. 6680-00-528-4915 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 6680-00-528-4915 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 6680-00-528-4915 is not classified as a special type of cargo when transported by water. 6680-00-528-4915 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 6680-00-528-4915 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: