6680-14-352-7408

14 Nov 1978 4710-14-352-7826 Metal Tube Assembly 281007RNCC: 5 | RNVC: 2 | DAC: 6 14 Nov 1978 6680-14-352-7408

3040-14-385-2257 Linear Actuating Cylinder Assembly 10854RNCC: 3 | RNVC: 2 | DAC: 6 26 Jul 1983 6680-14-352-7408

CAGE SNET6 Leader Electronics Limited in Hong Kong, Hong Kong

4730-01-333-0152 4730013330152 013330152 is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. the boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side inlet(s). it is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. see also tee, tube; and tee, pipe to tube. excludes connector, multiple, fluid pressure line.

5305-00-827-7072 5305008277072 008277072 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.