6665-99-325-0202

Documents 5945-00-502-9000 4+ Documents ( More... ) https//www.nsnlookup.com /fsg-66/fsc-6665/uk 6665-99-325-0202
Nbc Test Set 6665993250202 993250202,5029000 assortment, gasket; and bearing, washer, thrust. https
6625-14-502-9000 Signal Generator Test Set 6625145029000 www.nsnlookup.com /fsg-66/fsc-6665/uk 6665-99-325-0202

Documents 6625-14-502-9000 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-66/fsc-6665/uk 6665-99-325-0202
Nbc Test Set 6665993250202 993250202,5029000 005029000 5945-00-502-9000 5945005029000 005029000

5365-01-502-9000 5365015029000 015029000 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5620-37-502-9000 5620375029000 375029000

5915-14-434-8611 5915144348611 144348611 is an item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. excludes filter, low pass and suppressor, ignition interference. for items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. see also limiter, electrical noise.