6640-21-865-6346

| RNVC: 9 | DAC: B 25 May 2011 2590-01-495-6521 https//www.nsnlookup.com /fsg-66/fsc-6640/ca 6640-21-865-6346
Serological Pipet 6640218656346 218656346 6640-21-865-6346 6640218656346 218656346 is a laboratory

18 Dec 1997 6640-21-865-6345 Serological Pipet 409843RNCC: 5 | RNVC: 2 | DAC: 6 14 Apr 1972 6640-21-865-6346

5310-99-953-3883 5310999533883 999533883 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1650-99-640-8183 1650996408183 996408183 BODY

5310-01-229-8034 5310012298034 012298034 is a nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. for items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. see also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)