6625-25-148-0811

Documents 8415-25-151-2945 4+ Documents ( More... ) https//www.nsnlookup.com /fsg-66/fsc-6625/no 6625-25-148-0811
Electronic Systems Test Set 6625251480811 Documents ( More... ) https//www.nsnlookup.com /cage

5 Feb 2001 8415-25-151-2945 Rappelling Gloves ROPEG/8RNCC: 5 | RNVC: 2 | DAC: 9 28 Nov 2003 6625-25-148-0811

2805-99-200-2632 2805992002632 992002632 ENGINE BLOCK,GASOLINE

5310-14-200-2632 5310142002632 142002632 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

9515-01-200-2632 9515012002632 012002632 is a ferrous or nonferrous product with cross-sectional dimensions limited to those established in appendix c, fiig a131. includes corrugated and perforated items. for items 0.005 inch or .125mm thick and less. see foil, metal. for silver items see silver sheet.