6610-12-169-7580

5681 https//www.nsnlookup.com /fsg-66/fsc-6610 Flight Instruments from Germany (DE) 021-8689 6610-12-169-7580

002-0613 6610-12-002-0645 6610-12-002-0818 6610-12-002-0627 6610-12-022-6052 6610-12-021-8689 6610-12-169-7580

DAC: 5 11 Oct 1978 5340-12-314-7692 Bridge Clamp 5700586RNCC: 5 | RNVC: 9 | DAC: 9 9 Aug 1988 6610-12-169-7580

4820-21-850-0217 4820218500217 218500217 is an item usually metallic, threaded or unthreaded, used for securing to or positioning into a mating part. it is designed to be used in a globe, relief, regulator valve and the like as a means of controlling the flow of liquids or gases in a given system. one end may have an integral disk or be designed to accommodate a metallic or nonmetallic disk. the other end is designed for a handwheel, lever, spring, diaphragm and the like for nonpowered operation or to accommodate a gear, solenoid, air motor and the like for powered operation. the handwheel and/or disk may be furnished with the item. excludes stem, faucet; and stem, needle valve.

5365-99-850-0217 5365998500217 998500217 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.