6605-01-088-4171

Documents 5999-14-262-0919 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-66/fsc-6605/us 6605-01-088-4171
Shield Washer 6605010884171 010884171,2620919 -22-262-0919 6250222620919 222620919 PILOT,LAMP https

6250-22-262-0919 6250222620919 222620919 PILOT,LAMP

5935-01-262-0919 5935012620919 012620919 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.

4820-00-732-4520 4820007324520 007324520 is a valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. the flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. the stem is at a 90 degree (1.5708 radians) angle to axis of flow. excludes valve, stop-check; cock, shutoff, screw stem; and valve, solenoid.

5365-00-753-2314 5365007532314 007532314 is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.