6540-00-001-1021

Documents 8145-66-153-2877 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-65/fsc-6540/us 6540-00-001-1021
Compound Ophthalmic Lens 6540000011021 valve, graphite impregnated and lubricated items. https/

2 | DAC: 4 17 Dec 1971 6540-00-001-1024 https//www.nsnlookup.com /dla DLA Inventory NSN 1971 6540-00-001-1021

5310-66-151-8617 5310661518617 661518617 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5365-27-019-8817 5365270198817 270198817 is a straight nonfluid fitting with wrenching facilities on one end and external threads, other than pipe or hose series, on the other end. it has an unthreaded through hole in its axis which may be countersunk and/or counterbored on one or both ends. it is designed to accommodate a shaft, or the like, or used to reinforce a hole in a bulkhead, or the like. for similar items specifically designed for use in a stuffing box, see packing nut. for nonfluid items with an internal thread, see insert, screw thread&#59; or adapter bushing. excludes reducer, boss&#59; and items designed to accommodate a tube or tube fitting.

5310-66-151-8629 5310661518629 661518629 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.