6530-15-232-1351

-27-026-74398305270267439270267439 SAPKA DIREGI https//www.nsnlookup.com /fsg-65/fsc-6530/it 6530-15-232-1351
Tavola Spinale 6530152321351 152321351,855.01 only. see also washer, flat and spacer, sleeve. https

Documents 8465-15-170-5131 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-65/fsc-6530/it 6530-15-232-1351
Tavola Spinale 6530152321351 152321351,855.01 More... ) https//www.nsnlookup.com /cage Kong Spa

: 2 | DAC: 5 22 Feb 2002 8465-15-170-5131 Snow Claw 816RNCC: 3 | RNVC: 2 | DAC: 5 3 Mar 2003 6530-15-232-1351

3120-01-710-6481 3120017106481 017106481 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

3120-01-710-5370 3120017105370 017105370 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.